We’ll schedule a start date with you and will be there between 7am and 6pm. We don’t make specific appointment times and you don’t need to be home. If the work is in a garage, we will contact you regarding access.  Before your start date, ensure that there is a 6” perimeter around the workspace clear of landscaping obstructions such as plants/bushes, metal or block edging, sprinkler lines/heads, fencing, and any other materials that you do not want disturbed during service. Move any cars out of the workspace and park down the street to allow room for construction vehicles. Turn off any sprinklers for at least 48 hours. Do not walk or drive on your concrete for at least 24 hours.

We’ll schedule a start date with you and will be there between 7am and 6pm. We don’t make specific appointment times and you don’t need to be home. If the work is in a garage, we will contact you regarding access.  Before your start date, ensure that the workspace is clear of all items, including trash cans, bikes, grills, work benches, appliances, etc. If there are items that cannot be moved, make sure to completely cover them in plastic. If you need additional storage, give us a call and we can assist with getting you a one or two-week pod rental delivered to your driveway. Do not walk or drive on your concrete for at least 24 hours.

We’ll schedule a start date with you and will be there between 7am and 6pm. We don’t make specific appointment times and you don’t need to be home. If the work is inside, we will contact you regarding access. Before your start date, ensure that the workspace is clear of all items, including furniture, personal items, trash cans, bikes, grills, work benches, appliances, etc. If there are items that cannot be moved, make sure to completely cover them in plastic. If you need additional storage, give us a call and we can assist with getting you a one or two-week pod rental delivered to your driveway. Do not enter your space during or for 24 hours after completion of the spray foam project.

We recommend these steps to care for your new concrete.

1. Do not apply water or mist your concrete for 48 hours.  Ensure that sprinklers are turned off.
2. Backfill immediately and do not allow water to drain beneath your slab.
3. Clear organics and debris from your slab right away to prevent staining.
4. Apply a high quality self-leveling joint sealer to all control joints and maintain regularly.
5. Do not walk on your new concrete for 48 hours and do not drive on your new concrete for 10 days.  Keep all heavy vehicle traffic including package delivery vehicles off new concrete for at least 28 days.
6. Apply a high quality penetrating water and de-icing repellent sealer regularly over the lifetime of your concrete.
7. Shovel your driveway completely after each snow/ice event; ensure all road salt is cleared.  Do not drive on your driveway until snow/ice is cleared.
8. Do not apply salt to your driveway, use sand or other manufacturer approved traction material.
9. Avoid parking in the same spot on your driveway regularly in the winter.

We recommend these steps to care for your new concrete.

1. Do not walk or drive on your new concrete for 24 hours.
2. Do no drag or pull any items across the new flooring.
3. Clean up organics, oil, and chemicals from your coating right away.
4. Keep your new coating clean by sweeping and mopping with water and a light detergent (see manufacturer recommendations).
5. For heavy traffic, utilize a floor scrubber for a deeper clean.

Customer satisfaction is our number one priority. Our experienced craftsmen take pride in creating high-quality and long-lasting concrete solutions for your home. We offer a standard one-year warranty on new poured concrete and concrete floor coating. See the Terms and Conditions in your Agreement contract for more specific information.